Mazda introduced rotary engine vehicles in the US in 1971, beginning with the RX-2, RX-3, RX-4, RX-5, and finally three generations of the RX-7 sports car. However, the lack of creature comfort and user-friendliness, coupled with the high price tag and declining interest in sports cars and coupes at this time, led Mazda to pull the RX-7 from most major markets except Japan. After 1995, Mazda suffered from a relatively undistinguished product line in the US save the MX-5 Miata. As popular interest in import tuning and performance cars resurged in the late-1990s, thanks in part to various popular cultural influences such as the Sony PlayStation video game Gran Turismo[citation needed], Japanese automakers waded back into the performance and sports car market in the US. In addition, Mazda endeavored to rejuvenate itself around this time, partially with financial and management assistance from Ford, and successfully developed a new product line of high quality cars with desirable styling and superior driving dynamics, beginning with the Mazda6 and followed by the Mazda3, paving way for the arrival for Mazda's next-generation rotary sports car.
Like all RX Mazda\x26#39;s, the R3\x26#39;s
Development of the RX-8 can be traced to as far back as the 1995 Mazda RX-01 concept car, which featured an early iteration of the 13B-MSP engine. Naturally aspirated with side exhaust ports, this engine produced 210 hp (160 kW).[citation needed] As prohibited by Mazda's financial state at the time and the growing market interest in SUVs, the RX-01 never saw further development or production. However, a "skunkworks project" engineering team within Mazda kept the development of the 13B-MSP alive using MX-5 Miata chassis, eventually catching the attention of management, which at this time had come under heavy influence from Ford. Development of the 13B-MSP advanced and eventually led to the RENESIS moniker debuting along with the RX-EVOLV concept car which began to bear semblance to the production RX-8 with the "freestyle" rear suicide doors. Styling was developed via design competitions in Mazda tradition among its design studios in Japan, the US, and Europe. The project obtained official approval from management, and eventually the RX-8 concept car (design/engineering model) was produced and shown in 2001, closer resembling the production version. A near-production "reference exhibit" RX-8 was shown shortly thereafter at the 2001 Tokyo Motor Show, pending final approval for production. Production RX-8 closely resembles this vehicle save for minor trim details, and "job 1" began in February 2003 at Mazda's Hiroshima plant in Japan.
Mazda RX-8 R3
The RX-8 was designed as a front mid-engine, rear-wheel drive four-seat four-door coupé. The car has 50:50 front-rear weight distribution, and a low Polar Moment that is achieved by mounting the engine behind the front axle and the fuel tank ahead of the rear axle. The front wheels feature classic independent double wishbone suspension, while the rear are independent multi-link. Weight is trimmed through the use of materials such as aluminium and plastic for several body panels. The rest of the body is steel, save for the plastic front and rear bumpers. The manual gearbox model uses a carbon fiber composite driveshaft to reduce the rotational mass (moment of inertia) connected to the engine. Power is sent to the rear wheels via a Torsen limited slip differential for improved handling. While its not quite in the league as the last RX-7 in terms of raw performance, the RX-8 is considered its successor as Mazda's rotary engine sports car. Its layout and clever engineering, along with typical Mazda suspension tuning, have endowed it with excellent driving dynamics which have garnered much praise and numerous awards. It has also proven popular in Japan among car enthusiasts as well as aftermarket equipment manufacturers and professional tuners.
Mazda RX-8 R3 wallpaper
2009 Mazda RX-8 R3 - FRONT
2010 Mazda RX-8 R3
Mazda RX-8 R3 1680x1050
Like all RX Mazda\x26#39;s, the R3\x26#39;s
Development of the RX-8 can be traced to as far back as the 1995 Mazda RX-01 concept car, which featured an early iteration of the 13B-MSP engine. Naturally aspirated with side exhaust ports, this engine produced 210 hp (160 kW).[citation needed] As prohibited by Mazda's financial state at the time and the growing market interest in SUVs, the RX-01 never saw further development or production. However, a "skunkworks project" engineering team within Mazda kept the development of the 13B-MSP alive using MX-5 Miata chassis, eventually catching the attention of management, which at this time had come under heavy influence from Ford. Development of the 13B-MSP advanced and eventually led to the RENESIS moniker debuting along with the RX-EVOLV concept car which began to bear semblance to the production RX-8 with the "freestyle" rear suicide doors. Styling was developed via design competitions in Mazda tradition among its design studios in Japan, the US, and Europe. The project obtained official approval from management, and eventually the RX-8 concept car (design/engineering model) was produced and shown in 2001, closer resembling the production version. A near-production "reference exhibit" RX-8 was shown shortly thereafter at the 2001 Tokyo Motor Show, pending final approval for production. Production RX-8 closely resembles this vehicle save for minor trim details, and "job 1" began in February 2003 at Mazda's Hiroshima plant in Japan.
Mazda RX-8 R3
The RX-8 was designed as a front mid-engine, rear-wheel drive four-seat four-door coupé. The car has 50:50 front-rear weight distribution, and a low Polar Moment that is achieved by mounting the engine behind the front axle and the fuel tank ahead of the rear axle. The front wheels feature classic independent double wishbone suspension, while the rear are independent multi-link. Weight is trimmed through the use of materials such as aluminium and plastic for several body panels. The rest of the body is steel, save for the plastic front and rear bumpers. The manual gearbox model uses a carbon fiber composite driveshaft to reduce the rotational mass (moment of inertia) connected to the engine. Power is sent to the rear wheels via a Torsen limited slip differential for improved handling. While its not quite in the league as the last RX-7 in terms of raw performance, the RX-8 is considered its successor as Mazda's rotary engine sports car. Its layout and clever engineering, along with typical Mazda suspension tuning, have endowed it with excellent driving dynamics which have garnered much praise and numerous awards. It has also proven popular in Japan among car enthusiasts as well as aftermarket equipment manufacturers and professional tuners.
Mazda RX-8 R3 wallpaper
2009 Mazda RX-8 R3 - FRONT
2010 Mazda RX-8 R3
Mazda RX-8 R3 1680x1050
No comments:
Post a Comment